| | |
|
| |
| | |
|
|
|
V-12
|
|
|
100% Vectran 12-Strand single braid
|
Your Price: From $0.49 to $5.53
Product Options
| |
| |
Detailed Description
V-12
100% Vectran 12-Strand
PRODUCT DESCRIPTION:
V-12 utilizes 100% Vectran® R fiber in a twelve strand construction for a firm, round, and torque-free rope. V-12 exhibits extremely high strength, very low stretch, and ultra low creep. V-12 is treated with New England Ropes' unique marine-tech coating for improved durability and greater UV resistance.
(Vectran® is a registered trademark of Hoechst Celanese Corp.)
FEATURES:
- Very high strength
- Ultra low elongation
- Virtually no creep
- Low moisture gain
- Excellent wet / dry strength retention
- Torque-free, non-rotating, non-hockling
- Round construction
- Easy to splice
- Good knot holding qualities
APPLICATIONS:
Industrial
Marine
TECHNICAL SPECIFICATIONS:
STRENGTH / WEIGHT
Product Code
(White) |
Diameter |
Weight
(Lbs/100 ft.) |
Tensile
(Lbs.) |
| Inches |
mm |
| 1460-03 |
1/8 " |
3mm |
0.5 |
1,900 |
| 1460-05 |
3/16" |
5mm |
1.4 |
4,750 |
| 1460-06 |
1/4 " |
6mm |
1.9 |
7,500 |
| 1460-08 |
5/16" |
8mm |
3.4 |
11,500 |
| 1460-10 |
3/8 " |
10mm |
5.4 |
16,800 |
| 1460-11 |
7/16" |
11mm |
6.4 |
21,000 |
| 1460-12 |
1/2 " |
12mm |
7.7 |
24,500 |
| 1460-14 |
9/16" |
14mm |
10.5 |
34,500 |
| 1460-16 |
5/8 " |
16mm |
13.6 |
49,000 |
Compliance to the above specifications is based upon testing according to the Cordage Institute Standard Testing Methods for Fiber Rope and/or ASTM D-4268 Standard Methods of Testing Fiber Ropes.
Weights - Are average and may vary +/- 5%
Tensile strengths - Are approximate average for new, unused ropes. To estimate the minimum tensile strength of a new rope, reduce the approximate average by 15% (Cordage Institute defines minimum tensile strength as two standard deviations below the average tensile strength of the rope).
WORKING ELONGATION
SUNLIGHT/UV:
Minimum degradation from UV and aging.
CHEMICALS:
Good resistance to most minerals / organics, acids, weak alkalis. Excellent resistance to bleaches and other oxidizing agents and most solvents.
HEAT:
Melting point of Vectran 625°F, progressive strength loss above 430°F
DIELECTRICS:
Good resistance to the passage of electrical current. However in rope form, dirt, surface contaminants, water entrapment and the like can significantly affect dielectric properties. Extreme caution should be exercise any time a rope is in the proximity of live circuits.
SHEAVES:
Recommended D/d ratio is 8:1
WORKING LOADS:
No blanket working load recommendation can be made because it depends on the application and conditions of use, especially potential danger to personnel. It is recommended that the user establish working loads and safety factors based on professional and experienced assessments of risks. The working load is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or exceptional service such as shock, sustained loading, severe vibration, etc. The Cordage Institute specifies that the Safe Working Load of a rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses, 15 for life lines.
SLK= Minimum Break Strength / Safety Factor
COATING:
Coated with New England Ropes' marine-tech coating to improve abrasion resistance and UV resistance.
SPECIFIC GRAVITY:
COLOR:
Clear (gold), Red, Blue, and Green
QUALITY ASSURANCE:
STANDARD LENGTH:
600 ft
SPLICING INSTRUCTIONS:
Single Braid Eye Splice - Lock Stitch
FABRICATION SERVICES:
Fabricated units can be provided including splices, thimbles, integral chafe sleeves, etc. Contact customer service for deta Additional InformationClick here for more information!
|
|
|