T-900

DOUBLE BRAID

Click Here to Download this datasheet in .PDF Format (362kb)

PRODUCT DESCRIPTION:

T-900 is a high performance double braided rope, consisting of a blended Spectra® and Technora® core contained within a braided polyester jacket. The blended core creates a rope that is superior to either a Spectra® or a Technora® core rope. Specifically, T-900 combines the extremely high strength, light weight, and abrasion resistance of Spectra®, with the ultra low creep of Technora®. Coupled with the tough yet flexible polyester cover, T-900 is an ideal choice for very low stretch applications.
(Technora® is a registered trademark of Teijin, LTD Inc.)
(Spectra® is a registered trademark of Allied Signal Inc.)

FEATURES:

• Ultra low elongation
• Excellent strength to weight ratio
• Excellent Wet/dry strength retention
• Torque-free non-hockling
• Renders well on winches
• Splices well

APPLICATIONS:

INDUSTRIAL:

• Winch lines
• Stringing lines
• Underground pulling

MARINE:

• Spinnaker halyards
• Guys
• Main & Genoa sheets

TECHNICAL SPECIFICATIONS:

Compliance to the above specifications is based upon testing according to the Cordage Institute Standard Testing Methods for Fiber Rope and/or ASTM D-4268 Standard Methods of Testing Fiber Ropes.
Weights - Are average and may vary +/- 5%
Tensile strengths - Are approximate average for new, unused ropes. To estimate the minimum tensile strength of a new rope, reduce the approximate average by 15% (Cordage Institute defines minimum tensile strength as two standard deviations below the average tensile strength of the rope).

WORKING ELONGATION

SUNLIGHT/UV:

Very little degradation from UV. Can be used outside over long term if inspected regularly.

CHEMICALS:

Good resistance to most minerals / organics, acids, weak alkalis, bleaches and other oxidizing agents and most solvents.

HEAT:

Melting point of Polyester 480°F, progressive strength loss above 300°F;
Spectra® melting point 300°F, progressive strength loss above 150°F ,
Technora® chars at 600°F

DIELECTRICS:

Good resistance to the passage of electrical current. However in rope form, dirt, surface contaminants, water entrapment and the like can significantly affect dielectric properties. Extreme caution should be exercise any time a rope is in the proximity of live circuits.

SHEAVES:

Recommended D/d ratio is 8:1

WORKING LOADS:

No blanket working load recommendation can be made because it depends on the application and conditions of use, especially potential danger to personnel. It is recommended that the user establish working loads and safety factors based on professional and experienced assessments of risks. The working load is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or exceptional service such as shock, sustained loading, severe vibration, etc. The Cordage Institute specifies that the Safe Working Load of a rope shall be determined by dividing the Minimum Tensile Strength by the Safety Factor. Safety factors range from 5 to 12 for non-critical uses, 15 for life lines.

SLK= Minimum Break Strength / Safety Factor

COATING:

Can be Urethane coated to improve abrasion resistance, UV resistance and to create a water barrier.

SPECIFIC GRAVITY:

1.28

COLOR:

White, White with Red, Green, or Blue fleck

(red & blue tracers)

STANDARD LENGTH:

Available in standard 600ft lengths

SPLICING INSTRUCTIONS:

Core to Core Eye Splice

FABRICATION SERVICES:

Fabricated Units can be provides including splices, thimbles, integral chafe sleeves, etc. Contact Customer Service for details.

COMPLEMENTARY PRODUCTS:

• Multiline II
• NEREX
• Endura 12
• Sta-Set
• V-100
• PCRU

PART NUMBER SERIES:

2750 - white

276x - fleck colors

Additional Information