AT-140 - HF Automatic Antenna Tuner

Tune in your HF marine world Suitable for many vessels The versatile AT-140 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-140 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range. Automatic tuning No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-140 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-140 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations. Weather resistant The AT-140 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base. For Icom HF marine transceivers Icom's sophisticated AT-140 easily matches Icom HF marine transceivers. The AT-140 easily interconnects with an Icom HF marine transceiver. AT-140 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go! Quick tune-up Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-140 has 45 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1 second. This allows you quick trouble-free frequency changes. Low power tune-up The AT-140 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.

Specifications

Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included) Weight: 2.5 kg; 5.5 lb Usable Temperature Range: -30°C ~ +60°C Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver) Current Drain (at 13.6 V DC): 2 A Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer) Input Impedance: 50 ohms (unbalanced) Max. Input Power: 150 W (PEP) Input Power During Tuning: 10 W Auto Tuning Time: 1 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed) Auto Tuning Accuracy: VSWR 2.0:1 Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)