|
1071 - PTC-IIIusb Modem with PACTOR III
|
Item Number: 1071
|
1071 - PTC-IIIusb Modem with PACTOR IIISpeed up your data! The 1071 PTC-IIIusb includes PACTOR III mode - afforadable performance! The small enclosure make this modem easy to add to any HF / SSB radio installation.
PTC-IIusb with PACTOR III |
- PACTOR I, II and III standard.
- USB interface to PC, certified USB drivers
- Termperature compensated crystal oscillator
- 2mb of internal memory
- Motorola DSP
- Built-in VHF/UHF packet (excludes multiport capability of PTC-IIpro)
- GPS NMEA data input
- Transceiver Frequency control for many (most) radio models
- Same on air performance as all PTC modems in PACTOR I, II & III and Packet modes
|
The PTC-IIIusb comes with: Installation Guide, USB cable, audio cable (connector at one end, raw wires at the other end), power connector and CD-ROM.
|
Specifications
- Audio input impedance: 47 k
- Audio input level: 10 mVp-p... 2Vp-p
- Audio output impedance: 1 k
- Audio output level: Max. 3 Vp-p (open circuit), adjustable in 1 mV steps
- Audio processing: Digital signal processor DSP56303 clocked at 100 MHz 768 kByte additional DSP-RAM for data and program
- Central processor: Motorola MC68360 QUICC 32 bit CMOS CPU clocked at 25 MHz
- ROM: Max. 256 kByte, CMOS, FLASH-ROM for easy updates
- RAM: Static: 2 MByte, CMOS
- System monitoring: With an internal processor watchdog
- Operating temperature: -10 to +50 C
- Front panel: 8 LEDs split into various functional groups. ON / OFF Touch sensor switch
- Rear panel: Power supply, DIN Socket for transceiver audio, DIN socket for transceiver remote control, GPS connector - 3 wire screw terminal, USB "B" connector
- Power Supply: +10 to +20 V DC, 300 mA max. Reverse polarity protected, Fuse selfresetting
- Dimensions: Width 4.92" (125) x Height 1.69" (43) x Depth 5.43" (138) mm
|
|
|